top of page
Recommended post-curing cycle times for materials packaged with Stratasys Origin One systems. Always refer to the material manufacturer's processing guide for cure time recommendations and thermal exposure for a 405nm UV LED light source. Please Note: If you are curing using the Static Table, double cycle times and flip part.
Contact Onulis customer support with any questions regarding recommended cure times.
WRAPCure Certified Recommended Cure Times
Material | Cure Time | Notes |
|---|---|---|
BASF ST45 | 30 mins. | |
Evonik Phlame FR4100L | 120 mins. | * |
LOCTITE 3172 | 30 mins. | |
LOCTITE 3843 | 30 mins. | |
LOCTITE 403 | 30 mins. | |
LOCTITE Dura56 | 30 mins. | |
LOCTITE IND402 | 30 mins. | |
LOCTITE IND405 | 30 mins. | |
LOCTITE MED412 | 30 mins. | |
LOCTITE MED413 | 30 mins. | |
P3 Deflect 120 | 120 mins. | * |
P3 Stretch 475 | 30 mins. | |
Somos Quickgen 500 | 30 mins. | * |
* Material requires thermal post-cure. Please see Material Manufacturer's Technical Data Sheet for details.
WRAPCure Recommended Cure Times
Material | Cure Time | Notes |
|---|---|---|
BASF ST45 | 60 mins. | |
Evonik Phlame FR4100L | 240 mins. | * |
LOCTITE 3172 | 60 mins. | |
LOCTITE 3843 | 60 mins. | |
LOCTITE 403 | 60 mins. | |
LOCTITE Dura56 | 60 mins. | |
LOCTITE IND402 | 60 mins. | |
LOCTITE IND405 | 60 mins. | |
LOCTITE MED412 | 60 mins. | |
LOCTITE MED413 | 60 mins. | |
P3 Deflect 120 | 120 mins. | * |
P3 Stretch IND475 | 60 mins. | |
Somos Quickgen 500 | 60 mins. | * |
* Material requires thermal post-cure. Please see Material Manufacturer's Technical Data Sheet for details.
bottom of page